15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

An aluminum spiral staircase we fabricated several years ago. This staircase was constructed to allow access to a lift station.

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

We waterjet cut the letters and circles for these logos, then they are taken and the back aluminum plate is then treated to give it a rustic look. After the treatment, the brushed aluminum letters are applied to the backing using a special adhesive and they are sent to...

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

The start of what would become a pellet storage hopper that goes along in the same system as the 30’ pellet mill that is also shown. This hopper featured observation windows to monitor the volume of material, a bagger transition on the bottom so that the material can be...

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

Here is the 30’ pellet mill after being painted. The pusher assembly had not yet been installed in the shown open section, nor was the roof structure on top of the bin for this picture.

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

With over 30,000 sq.ft. in our facility, projects like this 30’ long pellet mill storage bin are no problem. We were chosen for this project primarily because of our capacity and our range of abilities. Our overhead cranes run the length of our shop, so moving large items like...

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

The body of a grit separator that is used to filter waste water or untreated water through so that the grit is separated from the water via gravitational forces. This is simply the main separation section where incoming water flows through the outer channel and treated, uprising water flows...

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

We had a factory come to us with a need for a cart to move some cylinders around their plant so they didn’t have to lift them from the ground to chest level. The result was this cart with an adjustable base and roller wheels so they could tilt...

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

A simple screen that fits over the intake of an  to avoid large solid objects from being sucked into it. This was made from rebar and carbon steel, then galvanized for corrosion avoidance.

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

This is an example of our along a concrete platform with an attached staircase that features raked BADDRail 1000. This handrail assembles quickly and easily and is our most cost-effective option for anodized aluminum rail.

Read more
15Jul
By: Heumann Environmental On: 15th July 2016 In: Projects Comments: 0

This cyclone was produced in addition to several other parts, such as the pictured classifier, in a large filtration/separation system.

Read more